letsdance.jpg

RGBW Mr. Dimmer
high frequency PWM dimmer with power supply inside

mr.dimmer_glow-transparent-tiny-glow-pin
mr-dimmer_rear-view-1.png

4x4 Individual Open-Drain PWM Outputs

Mr. The Dimmer allows you to control 4 RGBW or 5 RGB analog LED strips using 16 individual channels (up to 5A/channel). For professional TV installations, you can also adjust the 8/16-bit color channel precision (255 or 65535 grayscale). High frequency PWM has no flicker on camera/monitor.

Outputs over practical pluggable terminal blocks with pitch 5mm give you the advantage of fast connecting and disconnecting LED strip.

mr-dimmer-schema_LED-1024x503.png

52 Meters Of Analog LED Strips Without Additional Power Injection

Because the 320 W 24V DC power supply is an inner part of Mr. Dimmer, you can use it for up to 52 meters of Analog LED Strips, 30 LEDs per meter. Please note that the maximal current per each analog output is 13 A.

ceeu.jpg
mr-dimmer_GIF.gif

Status LEDs With A Purpose

Mr. When using a dimmer, it provides the necessary information for LED lighting production in real time.

1. Out LEDs let you know that analog signal is running through analog output. In this case, if your analog LED light doesn't shine, the problem can't be in power cable, power supply, even in control unit inside of Mr. Dimmer. You know that the problem can be in your RGB LEDs or connection between Mr. Dimmer and your LED strip.

2. Mr. Dimmer Status LEDs – Green LED means I'm on. Flashing Orange LED means I'm receiving DMX signal.

Power Supply Inside

We are offering several kinds of a power supply that can be integrated inside of Mr. Dimmer – 320W 24V, 320W 12V, 200W 24V (fanless), 200W 12V (fanless), another optional power supply on request.

Neutrik powerCON NAC3MPA and NAC3MPB for easy daisy-chaining of several units.

mr-dimmer_daisy-chain_power-1536x550.png

Downloads
Technical specification of Mr. Dimmer